Menu 0

Lens Service Disclaimers

◄Choose an topic below.
Please read the following disclaimers according to your quote.
◄Fungus Contamination
Fungus, haze, or staining located on the surface of an element can often be cleaned off with basic surface cleaning. However, these flaws can penetrate the surface coating, into the glass itself which cannot be corrected without more extreme measures. Fungus can also be located inside a cemented doublet or sealed optical unit which may require additional disassembly to investigate and attempt cleaning.
◄Polishing and Coating
Coating scratches can be reduced or eliminated by polishing and recoating an element in many cases. However, deep scratches or pits may be too severe to be corrected with polishing and recoating processes. Our team of expert technicians always take the utmost care when performing these processes. However, polishing and recoating is an extremely delicate process that should be carefully considered prior to approving. There are unavoidable risks that must be considered. Due to the risky nature of the polishing and re-coating process, we hold no responsibility for damage to elements. Replacement elements for damaged parts will come at an additional cost if available.
◄Doublet/Triplet Cementing
Our team of expert technicians always take the utmost care when performing these processes. The process of de-cementing can be extremely risky and should be carefully considered prior to approving. Due to high mortality rate of cemented elements we take no responsibility for damage to elements during the separation process. Replacement elements for damaged parts will come at an additional cost if available.
◄SUBJECT D
DETAILS D
◄SUBJECT E
DETAILS E